Use & Care: EasyWring Spin Mop & Bucket System
The EasyWring Spin Mop & Bucket System offers hands-free wringing, a triangular microfiber mop head, and effortless control with a foot pedal. It’s designed to make mopping easier, cleaner, and more efficient on all sealed hard floors, including hardwood, tile, vinyl, and laminate.
Here’s how to get the best performance out of your EasyWring system — from setup to care and mop head replacement.
Here’s how to get the best performance out of your EasyWring system — from setup to care and mop head replacement.
Ask the expert: How to wash your microfiber mop refills
Customer Service: How To Replace the EasyWring™ Spin Mop Head Replacement
How to extend the O-Cedar EasyWring Spin Mop handle
How O-Cedar Microfiber Mops Remove Over 99% of Bacteria with Just Water*
How does microfiber work? The science behind your mophead
EasyWring Spin Mop Frequently Asked Questions
The red triangle-shaped frame and connector on the refill is smaller than EasyWring, but the actual microfiber mop strings are longer to provide the same great cleaning performance with improved maneuverability to reach into tight spaces.
Please watch our product guide video to learn more about how to use your EasyWring Spin Mop handle.
The red triangle base for the EasyWring spin mop can be purchased on Amazon.
If you’re looking for information on the O-Cedar EasyWring vs. RinseClean spin mop, you’ve come to the right place.
The O-Cedar EasyWring spin mop is our OG spin mop and the #1 selling spin mop in America. The EasyWring spin mop features a foot-activated pedal for hands-free wringing and controlled water release.
The O-Cedar RinseClean spin mop is our innovative 2-bucket spin mop system for the true clean freak! The dual-bucket system completely separates clean and dirty water so you are always mopping with clean. It also features our signature foot pedal for easy wringing.
All of our spin mop and bucket systems feature machine washable and reusable mop head replacements – when you’re finished mopping, toss them in the wash, air dry and use them again!
We like to pair our spin mops with O-Cedar PACS Hard Floor Cleaner – a powerful, enzyme-based cleaning pod that you toss into your mop bucket. Tough on dirt and gentle on floors, O-Cedar PACS will leave your floors clean and streak-free.
To learn more about the difference between the EasyWring and RinseClean mops.
The O-Cedar EasyWring spin mop is our OG spin mop and the #1 selling spin mop in America. The EasyWring spin mop features a foot-activated pedal for hands-free wringing and controlled water release.
The O-Cedar RinseClean spin mop is our innovative 2-bucket spin mop system for the true clean freak! The dual-bucket system completely separates clean and dirty water so you are always mopping with clean. It also features our signature foot pedal for easy wringing.
All of our spin mop and bucket systems feature machine washable and reusable mop head replacements – when you’re finished mopping, toss them in the wash, air dry and use them again!
We like to pair our spin mops with O-Cedar PACS Hard Floor Cleaner – a powerful, enzyme-based cleaning pod that you toss into your mop bucket. Tough on dirt and gentle on floors, O-Cedar PACS will leave your floors clean and streak-free.
To learn more about the difference between the EasyWring and RinseClean mops.
It’s easy to use your O-Cedar spin mop and bucket system. Just fill the bucket with water, add cleaning solution if you like, and dunk your mop head into the bucket. To wring out excess moisture, lift the mop head from the bucket and insert into the circular wringer. Holding the handle loosely, pump the foot pedal 5 to 7 times to control the water level of your mop.
Mop starting at the furthest point in the room, so you don’t mop yourself into a corner. Use a figure-eight pattern when mopping.
When you’re finished mopping, you can toss your mop head into the washing machine, wash, and use again!
For more specific information on how to use the EasyWring spin mop system.
For more information on how to use the RinseClean spin mop system.
*Removes, does not kill, over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab
Mop starting at the furthest point in the room, so you don’t mop yourself into a corner. Use a figure-eight pattern when mopping.
When you’re finished mopping, you can toss your mop head into the washing machine, wash, and use again!
For more specific information on how to use the EasyWring spin mop system.
For more information on how to use the RinseClean spin mop system.
*Removes, does not kill, over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab
O-Cedar mop head replacements are available for purchase at many mass retailers, grocery stores, hardware stores and even some local stores. Check out our Where to Buy page to see the full list of retailers who carry our products. If you have questions about a product you do not see on our website, please call us at 1.800.543.8105 (Tuesday & Thursday, 9 a.m. – 2 p.m. CT)
O-Cedar spin mops, such as our O-Cedar EasyWring spin mop and our O-Cedar RinseClean spin mop can be used with any floor cleaning solution you like – or just water! In fact, all O-Cedar microfiber mop heads remove 99% of bacteria with water alone.*
For a more thorough clean, mix 2 teaspoons of your favorite solution with 1.6 gallons or water. Or for an even easier hack – consider O-Cedar PACS Hard Floor Cleaner! These perfectly-portioned cleaning pods are specially designed for O-Cedar buckets and use plant-based enzymes to deliver a powerful clean with no harsh chemicals. Just toss one PAC into your mop bucket, add water, and get mopping! You’ll be floored by the streak-free results.
*Removes, does not kill, over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab.
For a more thorough clean, mix 2 teaspoons of your favorite solution with 1.6 gallons or water. Or for an even easier hack – consider O-Cedar PACS Hard Floor Cleaner! These perfectly-portioned cleaning pods are specially designed for O-Cedar buckets and use plant-based enzymes to deliver a powerful clean with no harsh chemicals. Just toss one PAC into your mop bucket, add water, and get mopping! You’ll be floored by the streak-free results.
*Removes, does not kill, over 99% of E. coli and Staph. aureus from pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab.
Shop EasyWring and Mop Head Replacements
EasyWring™ Spin Mop & Bucket System
EasyWring™ Mop Head Replacement
EasyWring™ Deep Clean Mop Head Replacement
How to Use the EasyWring Spin Mop
Fill the bucket with water
Remove or open the top ring and fill the bucket’s water compartment with warm water (add mild floor cleaner if desired).
Dampen the mop head
Dip the microfiber mop head into the water compartment so it absorbs solution.
Wring out excess water
- Place the mop head inside the wringer section of the bucket.
- Step on the foot pedal to spin the mop head and remove excess moisture. This hands-free wringing helps avoid splashes and keeps your hands dry.
Mop your floors
- Use steady, sweeping motions across the floor, working in sections.
- For corners, edges, and hard-to-reach spots, the triangular mop head shape and 360° swivel make it easier to clean thoroughly.
- If the mop head becomes too damp or dirty, repeat the wringing process.
Finish & clean up
- Once you’re done, drain and rinse both the clean water and wringer sections.
- Allow the bucket parts to dry before storing to prevent mildew.
How to Replace the EasyWring Mop Head
Remove the old head
After mopping, step firmly on the microfiber mop head to release it from the base.
Attach the new head
Align the new microfiber refill with the mop base and press downward until it locks or clicks in place.
Check for security
Give the mop head a gentle tug to make sure it’s firmly attached before use.
The EasyWring mop head is machine-washable and reusable.
Care & Maintenance Tips for Best Results
Washing
Clean the microfiber mop head on a warm, delicate cycle. Do not use bleach or fabric softeners — these can reduce the microfiber’s cleaning effectiveness.
Drying
Lay the mop head flat or hang it to air dry. Avoid tumble-drying at high heat.
Replacement frequency
Replace your mop head every 3 months (or with the change of seasons) to maintain optimal cleanliness and absorbency.
Bucket & system care
- Rinse and air-dry all bucket parts after use.
- Store the system in a cool, ventilated space to avoid mold and odor buildup.
Why the EasyWring System Is a Smart Choice
- Hands-free wringing via foot pedal keeps your hands clean and dry.
- Triangle microfiber head + 360° swivel reaches corners, under furniture, and tight spaces.
- Washable & reusable refill heads reduce waste and save money over disposable pads.
- Suitable for all sealed hard floors — hardwood, vinyl, tile, laminate.
Categories
About O-Cedar
Need Help?
Find our products
Follow Us
